Turn on the printer after making sure the main tray is loaded with paper. Select Network setup or Settings from the Wireless or Setup menu, and then Restore Network Settings. Obtain the network name as well as the password. Wi-Fi Protected Setup (WPS), the printer's onboard HP Printer Wireless Setup Wizard, or connecting your printer to your computer via USB and configuring the wireless connection using the supplied software are the three major ways to connect your printer to your Wi-Fi network.
How to connect a printer via wireless network:- Step 1: Locate your settings. Once turned on and ready for configuration, you'll need to connect the printer to your home WiFi. ..
Step 2: Link your WiFi network.
Step 3: Complete connectivity.
Step 4: Locate your printer settings.
Step 5: Connect the HP printer wireless to the computer.
Use the Wi-Fi Protected Setup (WPS) button on your router to connect the printer to your wireless network.
Place the printer near the Wi-Fi router.
Put the printer in WPS connection mode.
Most printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash.
HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button and the Power button on the back of the printer for five seconds until the blue bar flashes.
Within two minutes, press and hold the WPS button on the router until the connection process begins.
Wait for the Wireless light or bar on the printer to stop flashing. The printer is now connected to the network.